Ad
Ad unit reserved — ca-pub-2582995408460804 · header

Appliance electricity cost calculator

That space heater is not $30. It's a line item.

Choose a common appliance or enter any wattage, add your hours per day and electricity rate, and see exactly what that device costs to run.

Your appliance

W
$
¢
¢/kWh from your bill

Results

Yearly cost

$0.00

What this device costs to run

  • Per day$0.00
  • Per month (30 days)$0.00
  • Per year$0.00
  • Energy used$0.00
  • Wattage$0.00

A 1,500 W space heater at 4 hrs/day and 16¢/kWh costs about $288/year — often more than the heater itself.
Ad
Ad unit reserved — ca-pub-2582995408460804 · in-content

The usual suspects

Heating and cooling dominate home electricity: space heaters, electric dryers, and window ACs draw 1,000–3,000 watts, while a modern TV or LED bulb sips under 150. Cost scales with watts × hours, so a “small” heater run all winter dwarfs a big TV used two hours a night.

Average vs rated wattage

Labels show maximum draw. Fridges, ACs, and anything with a thermostat cycle on and off — a 150 W fridge might average 40–60 W over a day. For cycling appliances, use the average from a plug meter or your bill math, not the sticker.

Where to cut

Attack the biggest yearly-cost numbers first: shorter dryer cycles, a degree or two on the thermostat, and killing the always-on space heater beat unplugging phone chargers by two orders of magnitude.

Frequently asked questions

How much does it cost to run a space heater?

A 1,500 W heater at 4 hours/day and 16¢/kWh costs about $0.96/day — roughly $29/month or $288/year if run year-round.

What uses the most electricity in a home?

Electric heating/cooling, water heating, and dryers — all 1,000+ watt devices run for hours. Electronics and lighting are rounding errors by comparison.

How do I find my electricity rate?

Check the supply/delivery lines on your bill and divide total cost by kWh used — the all-in ¢/kWh is what matters, not just the supply rate.

Do appliances use power when off?

Some do (standby/vampire draw), but it's usually 1–5 watts — pennies a month. Focus on the big heating loads first.

What an appliance really costs to run

Your electricity bill is a pile of small decisions that look innocent on a label. This calculator answers a blunt question for any plug-in device: at your actual electricity rate, what does running it cost per day, per month, and per year? It is for renters wondering whether the ancient dryer is worth replacing, homeowners sizing the impact of a new hot tub, and anyone who has stared at a bill thinking it can't be the phone chargers. Enter the wattage (or pick a preset), how many hours it runs each day, and your all-in rate per kilowatt-hour. The honest-input rule matters most here: a space heater's 1,500-watt sticker is its draw when the element is on, but a thermostat-controlled appliance cycles — so for fridges, ACs, and dehumidifiers, use an average from a plug meter or your own bill math rather than the nameplate.

Worked example: space heater, 5 hours a day

Take a 1,500-watt space heater running 5 hours a day at 17¢ per kWh. The engine first converts to energy: 1,500 × 5 ÷ 1,000 = 7.50 kWh per day. Multiply by the rate and one day costs $1.28. PlainCalc then scales that daily figure to a 30-day month ($38.25) and a 365-day year ($465.38). Two things jump out. First, the yearly number is what stings — under forty dollars a month quietly becomes nearly $465 a year. Second, run the 10-watt LED preset at the same hours and rate: 0.05 kWh a day, $0.01 a day, about $3.10 a year. The heater costs roughly 150 times more to run, which is exactly why this calculator's real job is ranking your appliances so you attack the expensive ones first.

Common questions

Why a 30-day month and a 365-day year?

The engine multiplies the daily cost by exactly 30 and exactly 365. Real months vary in length and bills include fixed charges, so treat the monthly figure as a standardized comparison unit rather than a prediction of next month's statement.

My appliance cycles on and off — what wattage do I enter?

Enter the average draw across the hours you counted, not the nameplate maximum. A fridge labeled 150 W might average 50 W over a day because the compressor rests between cycles; entering 150 would triple the true cost. A $20 plug meter settles the question in a day.

Should I use my supply rate or the full rate?

Use the all-in rate: your total bill divided by total kWh, which folds in delivery charges, surcharges, and taxes. The supply-only line on the bill understates the true cost by 30–50% in many utility territories, and every comparison you make inherits that error.

Can I compare two appliances against each other?

Run it twice and subtract. The engine models one device at a time, so a 3,000-watt dryer at 1 hour a day versus a 1,500-watt heater at 5 hours a day is just two runs and a subtraction — the difference is the savings from switching.

How this is calculated

Energy per day is watts times hours per day divided by 1,000, giving kilowatt-hours. The daily cost is that figure times your rate (your cents-per-kWh entry divided by 100). The monthly figure multiplies the daily cost by 30; the yearly figure multiplies it by 365. No efficiency losses, standby draw, or tiered rates are modeled — it is straight-line arithmetic on the inputs you provide. Your cents-per-kWh entry is divided by 100 once, up front, so entering 17 means seventeen cents rather than seventeen dollars.

Ad
Ad unit reserved — ca-pub-2582995408460804 · sticky mobile